Residential Diagnostic, Installation and Maintenance Services
- Residential Diagnostic Fee (RDF) – $59 Flat Rate: This service includes the safety tests required by federal law including both the contact and non-contact reversing tests. If this is an electrically operated door, the pull-down rope is removed and locks are disabled. Door is labeled and safety warnings are updated. Door and operator are inspected and differences from manufacturer specifications are noted. Problems are diagnosed and your quote is prepared. Your service call is included with this service and also a full safety inspection of your garage doors and garage door openers. Parts and repairs are not included in this price. For your convenience, Martin offers 24-hour service, but RDF cost may be higher after hours.
- Garage Door Standard Preventative Maintenance (SPM) – $99 Flat Rate: This includes the RDF above, plus minor code compliance adjustments such as moving photo eyes to 4-6″ above floor, moving emergency disconnect handle to at least 72″ above floor, and moving your wall button higher than 60″. All moving parts are lubricated and checked for tightness including hinges, rollers, spring bearings (if accessible), side bearings, tracks, springs, cable pivots, roller tubes / pivots, operator rail, operator trolley, operator gears (if accessible), motor (if accessible), operator arm pivots, and jambs (if appropriate).
- Garage Door Full Preventative Maintenance (FPM) – $149 Flat Rate This service includes the RDF and SPM above, plus minor adjustments to springs, struts, tracks, hinges, brackets, locks, operator, and sensors. It also includes replacement of remote batteries.
- Vault Garage Break In – $59 to $299 or more: Did you lock yourself out of the garage? Some garages do not have a window or any other entry door, so if the power goes off or your remote quits working you may need to hire Martin to break into your garage! The cost depends on what is involved. If a minor service to your remote or keypad repairs the problem, the cost will be low. If the door must be entered through an abnormal entry (which may damage your door), there may be extra labor and parts.
- Installation of your Garage Door Operator – $135 to $200: This service includes the RDF and operator Installation labor of up to 8′ high garage door operators, motors, rail and accessories. Includes up to 8′ punched angle. Does not include any wire or surge protector.
- Installation of Standard Garage Door – $175 to $599 or more: This service includes the RDF and door installation up to an 8’ high garage door and all hardware. Includes up to 8’ of punched angle. Does not include installation of the garage door operator or any wiring. Pricing depends on the width, height, type and weight of the garage door. Copper garage doors, aluminum garage doors and glass garage doors have higher rates. Preparation of opening is not included.